Keysight E4981A - Measurement Time

188 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Specifications and Supplemental Information
Supplemental Information
10-
Measurement time
Figure 10-11 Timing chart and measurement time
Table 10-15 shows the values of T1 - T5 when the following conditions are
met.
Display update: Off
Measurement range mode: Hold
Source delay time: 0 ms
Trigger delay time: 0 ms
Averaging factor: 1
Synchronous Source: On
Signal Level Compensation: Off
Measurement Time Mode (N): 1
Correction: On
Multi-correction: On
LAN: Not connected
e4981aue0013
EXT_TRIG
/INDEX
/EOM
/READY FOR
_TRIG
T1 T2 T4 T5
T3