246 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Technical Information
Basic Principles of Capacitance Measurement
-
Basic Principles of Capacitance Measurement
This section explains the useful basics when measuring capacitance with the
E4981A.
Typical characteristics of capacitance DUT
As shown in Table E-1, the impedance characteristics of capacitance
components change depending on the actual operating conditions. Therefore,
to measure impedance accurately, it is necessary to take measurements under
the actual operating conditions in which the component is used.
Table E-1 Typical characteristics of capacitance DUT
DUT Example of Characteristics Measurement function
Small C Cp-D, Cp-Q, Cp-G, Cp-Rp
Large C Cs-D, Cs-Q, Cs-Rs
To Next Page
Loading...
