Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 79
Setting up Measurement Conditions and Display
Saving/Recalling Instrument Setup State (Save/Recall Function)
Figure 4-4 CATALOG page
Medium mode
Functional description
You have to specify the medium type of the destination or source before saving
or recalling instrument configurations.
To select the medium mode:
Step 1. Press [Save/Recall].
Step 2. Use the cursor keys to select the MEDIA field.
Step 3. Select the medium mode by pressing the appropriate softkey:
Softkey Description
INT Uses the internal memory as the destination or source. Once you have
selected this mode, the register numbers (in the No. field) change to 0
through 9.
EXT Uses USB memory as the destination or source. Once you have selected
this mode, the register numbers (in the No. field) change to 10 through
19.
To Next Page
Loading...
