Keysight E4981A - Screen Area: Names and Functions of Parts; Display; Comment Line Area

30 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Overview
Screen Area: Names and Functions of Parts
2-
Screen Area: Names and Functions of Parts
This section describes the names and functions of parts on the E4981A’s LCD
screen.
Figure 2-3 Screen display
1. Display page area
Shows a display page name of the current display page.
2. Comment line area
You can input up to 30 characters in ASCII format by using the front panel or
the DISPlay:LINE command of the SCPI command. The first 22 characters are
displayed in this area.
Comment line is displayed on MEAS DISPLAY, BIN No. DISPLAY, BIN COUNT
DISPLAY and MEAS SETUP display page.
For the input method in the comment line, refer to “Inputting Comment Line”
on page 53.