Keysight E4981A - Caution When Using the Handle

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 17
Unpacking and Preparation
How to Remove the Handle
Caution when using the handle
Follow the instructions below when using the E4981A’s handle, otherwise you
may get your fingers caught in the handle or the E4981A may fall and be
damaged
• When the handle is set up as shown in Figure 1-4, do not put any additional
weight onto the E4981A or lift it suddenly.
• Do not touch the handle while the DUT is attached.
Figure 1-4 The handle in the set-up position
e4981aue0022