Keysight E4981A - Saving;Recalling Instrument Configuration States Into;From USB Memory

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 83
Setting up Measurement Conditions and Display
Saving/Recalling Instrument Setup State (Save/Recall Function)
Using a hard key to recall states from the internal memory
You can also recall configuration states from a particular register in the internal
memory by pressing one of the following hard keys:
Saving/Recalling instrument configuration states into/from USB memory
Figure 4-6 shows the fields available on this page along with the softkeys
corresponding to them.
Figure 4-6 CATALOG page (when saving instrument configurations into USB memory)
Hard key Description
Recall A Recalls configuration states from register 0 (#0 in the No. field).
Recall B Recalls configuration states from register 1 (#1 in the No. field).
㪼㪋㪐㪏㪇㪸㫌㪼㪈㪈㪋㪈
㪑㩷㩷㪝㫀㪼㫃㪻
㪑㩷㩷㪤㫆㫅㫀㫋㫆㫉