Keysight E4981A - Measurement Signals; Measurement Cable Lengths; Measurement Time Selection; Measurement Range Selection

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 169
Specifications and Supplemental Information
Basic Specifications
Measurement signals
Measurement cable lengths
0 m, 1 m, 2 m
Measurement time selection
5 speeds Measurement time mode: N = 1, 2, 4, 6, 8
For information on the measurement time in each mode, refer to
“Measurement time” on page 188.
Measurement range selection
Auto, Hold
Frequency
Allowable frequencies
120 Hz
1 kHz
1 MHz
0.98 MHz (1 MHz -2%)
0.99 MHz (1 MHz -1%)
1.01 MHz (1 MHz +1%)
1.02 MHz (1 MHz +2%)
Accuracy ± 0.02%
Level
Range 0.1 V - 1 V
Resolution 0.01 V
Accuracy ± 5%
Output mode Continuous, Synchronous
Source delay
time
1
1. Source delay time is effective when output mode is set to Synchronous mode.
Range 0 to 1 s
Resolution 0.1 ms