Keysight E4981A - Measurement Accuracy Details

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 69
Setting up Measurement Conditions and Display
Changing the Beep Tone
Changing the Beep Tone
Functional description
The E4981A allows you to change the beep tone to one of five levels.
To change the beep tone:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Use the cursor keys to select the BEEPER TONE field.
Step 4. Change the beep tone by pressing the appropriate softkey:
Softkey Description
TONE 1
Selects tone 1.
TONE 2 Selects tone 2.
TONE 3 Selects tone 3.
TONE 4 Selects tone 4.
TONE 5 Selects tone 5.