Keysight E4981A - How to Remove the Handle

16 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Unpacking and Preparation
How to Remove the Handle
1-
How to Remove the Handle
A handle kit is attached to the E4981A Option 600. When using the E4981A
with the rack-mount kit, remove the handle according to the following steps.
Figure 1-3 How to remove the handle
Step 1. Lift the handle perpendicular to the unit while pulling it in the direction of 1.
Step 2. While pulling the handle in the direction of 1, lift towards 2.
Install the handle with 3 facing toward the front. Installing the handle the
other way around may damage it.
e4981aue0021
䐟
䐟
䐠
䐡