Keysight E4981A - Configuring the System Date; Functional Description

Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter 71
Setting up Measurement Conditions and Display
Configuring the System Date
Configuring the System Date
Functional description
The E4981A features a built-in clock.
To configure the system date:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Use the cursor keys to select the DATE/TIME field.
Step 4. Use the following softkey:
Step 5. If you have selected the date field, use the following keys to edit the year,
month, and day. If you have selected the time field, proceed to
Step 7.
Step 6. Enter the year/month/day using the softkeys or entry keys. If you use the entry
keys to enter the value, the softkey labels change to unit labels (x1).
Configure the system date after “Configuring the Time Zone” on page 70.
Softkey Description
DATE
Selects the date field so that you can change the year, month, and day.
TIME
Selects the time field so that you can change the hour, minute, and
seconds digit.
Softkey Description
YEAR Allows you to change the year digit.
MONTH Allows you to change the month digit.
DAY Allows you to change the day digit.
Softkey Description
YEAR INCR+ Increments the year in steps of 1.
YEAR DECR- Decrements the year in steps of 1.
MONTH INCR+ Increments the month in steps of 1.
MONTH DECR- Decrements the month in steps of 1.
DAY INCR+ Increments the day in steps of 1.