84 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Setting up Measurement Conditions and Display
Saving/Recalling Instrument Setup State (Save/Recall Function)
4-
Functional description
When you save configuration states into USB memory, they are saved as
predefined files in predefined locations. You cannot manually define the file
names or locations.
Each state file is assigned a file name in the format of “register number.sta”.
To save configuration states into USB memory:
Step 1. Press [Save/Recall].
Step 2. Use the cursor keys to select the MEDIA field.
Step 3. Press the EXT softkey.
Step 4. Use the cursor keys to select the No. field (10 through 19) for your desired
register.
Step 5. Press the SAVE softkey to save configuration states into the USB memory.
To recall configuration states from USB memory:
Step 1. Press [Save/Recall].
Step 2. Use the cursor keys to select the MEDIA field.
Step 3. Press the EXT softkey.
Step 4. Use the cursor keys to select the No. field (10 through 19) for your desired
register.
Step 5. Press the RECALL softkey to recall configurations from the USB memory.
If you attempt to recall configuration states under any of the following
conditions, an “Incompatible state file” warning message is displayed.
• The configuration states were saved under a different firmware version.
• The configuration states were saved from another E4981A with a different
option(s) equipped.
If you have selected the No. field for a register that already contains
configuration states, the new configuration states overwrite the existing
ones.
State files are automatically assigned file names 10.sta through 19.sta, and
you cannot change the file names.
To Next Page
Loading...
