-
Notices
© Keysight Technologies  
2008 - 2019
No part of this manual may be repro-
duced in any form or by any means 
(including electronic storage and 
retrieval or translation into a foreign 
language) without prior agreement 
and written consent from Keysight 
Technologies, Inc. as governed by 
United States and international 
copyright laws.
Manual Part Number
E4981-90000
Edition
Edition 3,September 26, 2019
Printed in Malaysia
Published by:
Keysight Technologies International 
Japan G.K,
1-3-3 Higashikawasaki-cho
Chuo-ku 
Kobe-shi, Hyogo, Japan
Warranty
THE MATERIAL CONTAINED IN THIS 
DOCUMENT IS PROVIDED “AS IS,” 
AND IS SUBJECT TO BEING 
CHANGED, WITHOUT NOTICE, IN 
FUTURE EDITIONS. FURTHER, TO 
THE MAXIMUM EXTENT PERMITTED 
BY APPLICABLE LAW, KEYSIGHT 
DISCLAIMS ALL WARRANTIES, 
EITHER EXPRESS OR IMPLIED WITH 
REGARD TO THIS MANUAL AND 
ANY INFORMATION CONTAINED 
HEREIN, INCLUDING BUT NOT LIM-
ITED TO THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PUR-
POSE. KEYSIGHT SHALL NOT BE 
LIABLE FOR ERRORS OR FOR INCI-
DENTAL OR CONSEQUENTIAL DAM-
AGES IN CONNECTION WITH THE 
FURNISHING, USE, OR PERFOR-
MANCE OF THIS DOCUMENT OR 
ANY INFORMATION CONTAINED 
HEREIN. SHOULD KEYSIGHT AND 
THE USER HAVE A SEPARATE WRIT-
TEN AGREEMENT WITH WARRANTY 
TERMS COVERING THE MATERIAL 
IN THIS DOCUMENT THAT CON-
FLICT WITH THESE TERMS, THE 
WARRANTY TERMS IN THE SEPA-
RATE AGREEMENT WILL CONTROL.
Technology Licenses
The hardware and/or software 
described in this document are fur-
nished under a license and may be 
used or copied only in accordance 
with the terms of such license.
Declaration of Conformity
Declarations of Conformity for this 
product and for other Keysight prod-
ucts may be downloaded from the 
Web. Go to http://www.key-
sight.com/go/conformity. You can 
then search by product number to 
find the latest Declaration of Confor-
mity.
U.S. Government Rights
The Software is “commercial com-
puter software,” as defined by Fed-
eral Acquisition Regulation (“FAR”) 
2.101. Pursuant to FAR 12.212 and 
27.405-3 and Department of Defense 
FAR Supplement (“DFARS”) 
227.7202, the U.S. government 
acquires commercial computer soft-
ware under the same terms by which 
the software is customarily provided 
to the public. Accordingly, Keysight 
provides the Software to U.S. gov-
ernment customers under its stan-
dard commercial license, which is 
embodied in its End User License 
Agreement (EULA), a copy of which 
can be found at http://www.key-
sight.com/find/sweula
. The license 
set forth in the EULA represents the 
exclusive authority by which the U.S. 
government may use, modify, dis-
tribute, or disclose the Software. The 
EULA and the license set forth 
therein, does not require or permit, 
among other things, that Keysight: 
(1) Furnish technical information 
related to commercial computer soft-
ware or commercial computer soft-
ware documentation that is not 
customarily provided to the public; or 
(2) Relinquish to, or otherwise pro-
vide, the government rights in excess 
of these rights customarily provided 
to the public to use, modify, repro-
duce, release, perform, display, or 
disclose commercial computer soft-
ware or commercial computer soft-
ware documentation. No additional 
government requirements beyond 
those set forth in the EULA shall 
apply, except to the extent that those 
terms, rights, or licenses are explic-
itly required from all providers of 
commercial computer software pur-
suant to the FAR and the DFARS and 
are set forth specifically in writing 
elsewhere in the EULA. Keysight 
shall be under no obligation to 
update, revise or otherwise modify 
the Software. With respect to any 
technical data as defined by FAR 
2.101, pursuant to FAR 12.211 and 
27.404.2 and DFARS 227.7102, the 
U.S. government acquires no greater 
than Limited Rights as defined in FAR 
27.401 or DFAR 227.7103-5 (c), as 
applicable in any technical data.
Safety Notices
A CAUTION notice denotes a haz-
ard. It calls attention to an oper-
ating procedure, practice, or the 
like that, if not correctly per-
formed or adhered to, could 
result in damage to the product 
or loss of important data. Do not 
proceed beyond a CAUTION 
notice until the indicated condi-
tions are fully understood and 
met. 
A WARNING notice denotes a haz-
ard. It calls attention to an oper-
ating procedure, practice, or the 
like that, if not correctly per-
formed or adhered to, could 
result in personal injury or death. 
Do not proceed beyond a WARN-
ING notice until the indicated 
conditions are fully understood 
and met.