242 Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Error Messages
Warning Messages (WARNING)
-
WARNING: Improper high/low limits
The upper limit value is less than the lower limit value. Set the lower limit value
to less than the upper limit value.
WARNING: Incompatible state file
The setting file recalled from external mass storage device has been saved
using an E4981A with a different firmware version or different options. There
may be some parameters set up incorrectly. Check the setting.
This message may appear due to option mismatch, firmware mismatch,
check-sum error or state format mismatch.
To Next Page
Loading...
