Keysight E5071C ENA - Page 28

28 Keysight E5071C ENA Network Analyzers
General Information
Required Equipment
1-
Step Attenuator No Substitute Keysight 8496G
Opt.H52 or
8496G-001 & H60
1P
Calibration Kit No Substitute Keysight 85052D 1 P,A,T
Short 50ohm 3.5mm (f) Short
Termination
Keysight p/n
85052-60007
4P,T
Short 50ohm 3.5mm (m) Short
Termination
Keysight p/n
85052-60006
1P,T
Load Type 3.5mm (f) part of Keysight
85052D
4P, A
BNC Short Keysight p/n
1250-0929
2P,A
Fixed attenuator
(6 dB)
50 , N(m)-N(f),
VSWR  1.015
Keysight 8491A
w/Opt.006 and
H60
1P
Fixed attenuator
(10 dB)
50 , N(m)-N(f) Keysight
8491A/B/C
1T
Handler I/O Test
Kit
No substitute Keysight p/n
E5070-65071
1T
Low Pass Filter No substitute Keysight p/n
9135 -5852
1P
Cable BNC(m)-BNC(m) Cable, 61 cm
Coaxial cable with Type-N (m)
connectors, 61 cm (24 in),
2 ea.
Keysight p/n
8120-1839
Keysight N6314A
(p/n 8120-8862)
4
1
P, A
P, A , T
Cable 20 inch 50 ohm cable Keysight p/n
8120-1840
1P,T
Adapter N(m)-BNC(f) Adapter Keysight p/n
1250-0780
1P,A
Adapter APC 3.5 (f)-(f) Adapter Keysight p/n
85027-60005
4P,A
Adapter APC 2.5 (m)-N(f) Adapter Keysight p/n
1250-1811
1P,A
Table 1-4 Recommended Test Equipment
Equipment Critical specifications Recommended
Model
Qty
Use
1