Keysight E5071C ENA - Page 29

Keysight E5071C ENA Network Analyzers 29
General Information
Required Equipment
Adapter Adapter 3.5mm(f)-2.4mm(f) Keysight p/n
1250-1745
P
Adapter Adapter 3.5mm(f)-2.4mm(f) Keysight 11901B 2 P
Adapter Adapter BNC Tee Keysight p/n
1250-0781
2P
Adapter Adapter BNC(f)-Dual Banana Keysight p/n
1251-2277
P
Adapter N(m)-3.5mm(f) Keysight p/n
1250-2879
2P
Torque Wrench Size: 20 mm
Torque: 90 N-cm
Keysight p/n
8710-1764
1P,A
Personal
Computer with
GPIB board
Windows XP, VEE7.5 or later 1 P,A
1. P: Performance Tests, A: Adjustment, T: Troubleshooting
2. The accuracy of a standard E4419A/B of 0.02 dB is adequate for all tests/
adjustment except “Dynamic Accuracy Test”. This test requires a power meter with
Option G12 or H12 that has been certified to a higher accuracy specification. If an
Option G12 or H12 power meter is not available, a test is provided on
“Power
Meter Accuracy Test” on page 31
to verify the accuracy of a standard power
meter.
Table 1-5 Alternative Test Equipment
Equipment Critical specifications Model Qty
Use
1
Frequency
Counter 1
Frequency: 50 MHz to 8.5 GHz
Accuracy: < 2.5 ppm
Keysight 53131/2A
with Opt.010 and 124
1P,A
Multimeter Keysight 34401A
Keysight 34410A
Keysight 34411A
1
1
1
P, T
P, T
P, T
Function
Generator
Keysight 33220A
Keysight 33250A
1
1
P, T
P, T
Power Sensor No Substitute Keysight E9304A with
Opt. H19
1P,A
Short Type-N(m) Keysight 11512A 4 P,T
Table 1-4 Recommended Test Equipment
Equipment Critical specifications Recommended
Model
Qty
Use
1