Keysight MP4300 Series User Manual

[SOURce:]CURRent:DTABle:SASimulator[:IMMediate]? (@<chanlist>)
Returns the DAC table that was calculated based on the SAS parameter settings. The number of
current points returned is set at 1024.
Multiple responses are separated by commas. If more than one channel has been queried, all the DAC
values for the first channel are returned, followed immediately by the DAC values of the next channel.
Parameter Typical Return
<chanlist> one or more channels <4.8,4.9,5.0,5.1,5.2,5.3, ...>
Returns the DAC table settings on channel 2: CURR:DTAB:SAS? (@2)
[SOURce:]CURRent:DTABle:SASimulator[:IMMediate]:IMP? (@<chanlist>)
Returns the calculated Imp (maximum power current) of the internal DAC table.
Multiple responses are separated by commas. If more than one channel has been queried, all the DAC
values for the first channel are returned, followed immediately by the DAC values of the next channel.
Parameter Typical Return
<chanlist> one or more channels +3.620843E+00
Returns the calculated Imp of the DAC table settings on channel 2: CURR:DTAB:SAS:IMP? (@2)
[SOURce:]CURRent:DTABle:SASimulator[:IMMediate]:ISC? (@<chanlist>)
Returns the calculated Isc (short-circuit current) of the internal DAC table.
Multiple responses are separated by commas. If more than one channel has been queried, all the DAC
values for the first channel are returned, followed immediately by the DAC values of the next channel.
Parameter Typical Return
<chanlist> one or more channels +5.100000E+00
Returns the calculated Isc of the DAC table settings on channel 2: CURR:DTAB:SAS:ISC? (@2)
[SOURce:]CURRent:DTABle:TABLe[:IMMediate]? <"name">, (@<chanlist>)
Returns the DAC table that was calculated based on the values from the specified table. The number of
current points returned is set at 1024.
Multiple responses are separated by commas. If more than one channel has been queried, all the DAC
values for the first channel are returned, followed immediately by the DAC values of the next channel.
Parameter Typical Return
<"name"> the table name <4.8,4.9,5.0,5.1,5.2,5.3, ...>
<chanlist> one or more channels
Returns the DAC table on channel 2: CURR:DTAB:TABL? "table1", (@2)
Keysight MP4300 Series Operating and Service Guide 107
5 SCPI Programming Reference

Keysight MP4300 Series Specifications

General

Brand	Keysight
Model	MP4300 Series
Category	Power Supply
Language	English