8. You can also save and recall an instrument state by clicking on the Save/Recall tab. Then click on
the Save or Recall buttons.
9. Click the Configure LAN tab to configure the LAN settings. This page provides an overview of the
current LAN settings and lets you change those settings. The initial page displays the current LAN
configuration of your instrument. The Edit button opens the Edit Network Configuration page,
which lets you set a unique host name and description. The Advanced options button accesses the
reset network configuration option. You will need to reboot your instrument after you have
changed the LAN configuration
For additional help about any of the pages, click on the ? button.
3 Getting Started
66 Keysight MP4300 Series Operating and Service Guide
To Next Page
Loading...
