360 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
23 Web Interface
The web interface for InfiniiVision X-Series oscilloscopes also provides help for
each of its pages.
Microsoft Internet Explorer is the recommended Web browser for communication
and control of the oscilloscope. Other Web browsers may work but are not
guaranteed to work with the oscilloscope. The Web browser must be
Java-enabled.
Before you can use the web interface, you must place the oscilloscope on the
network and set up its LAN connection.
Accessing the Web Interface
To access the oscilloscope's web interface:
1 Connect the oscilloscope to your LAN (see “To establish a LAN connection" on
page 343) or establish a point-to-point connection (see “Stand-alone
(Point-to-Point) Connection to a PC" on page 344).
It is possible to use a point-to-point connection, but using a normal LAN
connection is the preferred method.
2 Type the oscilloscope's hostname or IP address in the web browser.
The oscilloscope's web interface Welcome Page is displayed.
To Next Page
Loading...
