Keysight MSOX3054T - Full Scope Remote Front Panel

362 Keysight InfiniiVision 3000T X-Series Oscilloscopes User's Guide
23 Web Interface
The SCPI Command window is useful for testing commands or entering a few
commands interactively. When creating automated programs for controlling the
oscilloscope, you will typically use the Keysight IO Libraries from within a
programming environment like Microsoft Visual Studio (see “Remote
Programming with Keysight IO Libraries" on page 366).
Full Scope Remote Front Panel
To operate the oscilloscope using the web interface's Full Scope Remote Front
Panel:
1 Access the oscilloscope's web interface (see “Accessing the Web Interface" on
page 360).
2 When the oscilloscope's web interface is displayed, select Browser Web Control,
then select Full Scope Remote Front Panel. After a few seconds the Remote Front
Panel appears.
3 Click keys or knobs that you would normally press on the oscilloscope's front
panel. Drag on edges of knobs to turn them.
NOTE
If Java is not installed on your PC, you will be prompted to install the Java Plug-in. This
plug-in must be installed on the controlling PC for the web interface's Remote Front Panel or
Remote Programming operations.