KGuard Security NS401 - 3.7 Manual Recording

ENGLISH
Chapter 3: Geng Started
38
DVR User’s Manual
3.7 Manual Recording
With this funcon, you can manually record the video. The system will connuously record the video unl you
manually stop the recording.
To enable manual recording:
1 In the preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Start Record.
The video recording starts.
To stop the manual recording:
1 Right-click on the mouse to display the Pop-up menu.
2 Select Stop Record.
The video recording stops.
Note:
This funcon is available only if record mode is set to schedule. See “4.2 Record Setup” on page 43.
3.8 Adjusng Volume
You can adjust or mute the output volume while viewing the channels on a monitor.
To adjust the volume:
1 In the preview mode, right-click on the mouse to display the Pop-up menu.
2 Select Volume.
3 Drag the slider to adjust the volume. Or, select MUTE to mute the audio.
4 Select the Save buon to save the volume seng.