KGuard Security NS401 - Setting the Remote Stream

ENGLISH
Chapter 5: KGUARD Web Client
88
DVR User’s Manual
Seng the Remote Stream
To congure the remote stream sengs, do the following:
1 On the Main Menu, click Remote Seng.
2 On the le panel, click Network > Remote Stream. The Remote Stream screen appears.
3 Modify the necessary sengs.
Item Descripon
Channel Select the channel that you want to congure.
Video Enable/Disable video display on the remote stream.
FPS Select the frame rate value between 1 to 30.
Quality Select the stream quality.
Audio Enable/Disable remote stream with audio.
4 To save the sengs, click Save.
« TIP »
• To apply the same sengs to other channels, click Copy. See “Copying Sengs To Other Channels” on page
80.
• To cancel any modicaons and retain the exisng sengs, click Refresh.