DIAGNOSTICS Using the Diagnostics
10DEC05
DG4825-1
Page
21 of 180
Table 6 “Repetitive Cycles”
BUTTON Description
[AutoLooper]
Important
• During the test, the “Light Test” is disabled to allow
operation with the PANELS removed.
• For the test procedure, see AUTOLOOPER.
• Automatically processes the CASSETTE to check if
it is reliable.
• Completes a test cycle including scanning and
erasing.
• Disables the “Patient Data” for the test.
• Displays status screens for the SENSORS.
[Transport]
Important
For the test procedure, see Transport.
• Uses a CASSETTE to test the operation of loading.
• Displays status of the SENSORS at each step.
To Next Page
Loading...
Need help?
General
