Replenishment Flow Rate
Average Amount mL per 35 cm mL per 43 cm
of Film (14 in.) 28 sec (17 in.) 34 sec
Film Size Use per 8 Hours of of Film Travel of Film Travel
Processed Condition Processor Operation Developer Fixer Developer Fixer
Only 35 x 35 cm High 90 sheets or more 50 70 .
(14 x 14 in.) film Medium 60 sheets 65 85 -- --
Low 30 sheets or less 80 100
Average size High 115 sheets or more 50 70 .
film intermix Medium 80 sheets 65 85 -- --
Low 40 sheets or less 80 100
Only 35 x 43 cm High 75 sheets or more . 60 85
(14 x 17 in.) film Medium 50 sheets -- -- 80 100
Low 25 sheets or less 100 120
NOTE
• KODAK
RP
X-OMAT Chemicals are recommended.
• Replenishment rates are based on one sheet of film.
• Film feeding orientation should be consistent for best results.
• Slight sensitometric changes will occur as subsequent films are processed through a freshly started
process. This is known as ‘‘seasoning’’ and is normal with any photographic process. Process control
aims may have to be adjusted slightly to compensate.
• For 30 sheets or less, flooded replenishment is recommended.
981777 2-39
To Next Page
Loading...
