Optional settings before file storage
14
14-6 bizhub C754/C654
14.1
Scan a folded original ([Z-Folded Original])
Even the original sizes of folded originals can be detected accurately.
If a folded original is loaded into ADF, the original size may not be able be detected accurately. To scan a
folded original through the ADF, use [Z-Folded Original].
NOTICE
Unfold folded originals before loading them into the ADF. If a folded original is not unfolded before scanning,
a paper jam may occur or the size may not be correctly detected.
For details, refer to the following page.
- When you are using a User Box, refer to page 15-14.
- When you are using an Annotation User Box, refer to page 15-132.
- When you are using an External Memory User Box, refer to page 15-194.
Scan a long original ([Long Original])
Load the long original on the ADF if it cannot be placed on the Original Glass and is larger in the feeding
direction than the full standard size (A3 or 11 e 17). There is no need of entering the original size in advance
but ADF will detect the size automatically.
For details, refer to the following page.
- When you are using a User Box, refer to page 15-14.
- When you are using an Annotation User Box, refer to page 15-132.
- When you are using an External Memory User Box, refer to page 15-194.
To Next Page
Loading...
Need help?
General
