17
17-18 bizhub C754/C654
[Network Settings]
To display: [Utility] - [Administrator Settings] - [Network Settings]
Configure the network function of this machine such as TCP/IP settings or Scan function operating environ-
ment settings.
Settings Description
[TCP/IP Settings] Configure the settings to use this machine in a TCP/IP environment.
[NetWare Settings] Configure the settings for using this machine in a NetWare environment.
[HTTP Server Settings] Select whether to restrict the use of Web Connection, and configure your
environment for IPP printing.
[FTP Settings] Configure the FTP transmission environment and the FTP server function
setting of this machine.
[SMB Settings] Set the SMB (Server Message Block) operating environment.
[LDAP Settings] Configure the settings to search for destinations from the LDAP server or
Active Directory.
[E-Mail Settings] Configure the settings for sending and receiving E-mail with this machine.
[SNMP Settings] Configure the settings to obtain information of this machine or to monitor
the machine using Simple Network Management Protocol (SNMP).
[AppleTalk Settings] Configure the AppleTalk operating environment if the machine is running
under Mac OS control.
[Bonjour Setting] Configure the Bonjour operating environment if the machine is running un-
der Mac OS control.
[TCP Socket Settings] Configure the TCP Socket operating environment.
[Network Fax Settings] Select whether to use Internet fax and IP address fax respectively. To use
IP address fax, configure the SMTP transmission environment.
[WebDAV Settings] Configure the WebDAV transmission environment and the WebDAV server
function setting of this machine.
[DPWS Settings] Configure the settings for print and scan using the Web services (such as
Devices Profile for Web Services (DPWS)).
[Distributed Scan Settings] Select whether or not to use the Distributed Scan Management on this ma-
chine.
[SSDP Settings] Select whether to use the SSDP (Simple Service Discovery Protocol) or
not. To use SSDP, change the multicast TTL as necessary.
[Detail Setting] Configure the detailed network settings.
[IEEE802.1x Authentication
Settings]
Select whether to use IEEE802.1x authentication. To use IEEE802.1x au-
thentication, check the authentication status and configure the certification
verification items.
[Web Browser Setting] Select whether to enable a Web Browser.
[Bluetooth Setting] Select whether to enable Bluetooth.
[Single Sign-On Setting] Join the machine to the Active Directory domain and establish the Single
Sing-on environment.
[IWS Settings] Set the operating environment of IWS (Internal Web Server) function.
[Remote Panel Settings] Configure settings for remotely controlling the Control Panel of this ma-
chine from another computer.
[Internet ISW Settings] Configure the settings to download the machine firmware via the Internet
and update the existing firmware.
To Next Page
Loading...
Need help?
General
