bizhub C754/C654 14-7
14.1 Optional settings before file storage
14
Specify the original loading direction ([Original Direction])
When scanning a double-sided original, you can specify the original loading direction so that the vertical di-
rection is set correctly after scanning.
For details, refer to the following page.
- When you are using a User Box, refer to page 15-14.
- When you are using an Annotation User Box, refer to page 15-132.
- When you are using an External Memory User Box, refer to page 15-194.
Specify the binding position of the original ([Binding Position])
When scanning a double-sided original, specify the binding position of the original in [Binding Position] to
prevent the binding position from being reversed between the front and rear faces.
For details, refer to the following page.
- When you are using a User Box, refer to page 15-14.
- When you are using an Annotation User Box, refer to page 15-132.
- When you are using an External Memory User Box, refer to page 15-194.
Scan while removing dust in the slit glass ([Despeckle])
When scanning an original that has been placed into the ADF, scanning of the original and removal of dust
from the Slit Scan Glass are performed alternately so that the original is always scanned using clean Slit
Scan Glass.
It takes longer to finish scanning of originals, compared to the normal operation.
For details, refer to the following page.
- When you are using a User Box, refer to page 15-14.
- When you are using an Annotation User Box, refer to page 15-132.
- When you are using an External Memory User Box, refer to page 15-194.
To Next Page
Loading...
Need help?
General
