bizhub C754/C654 15-39
15
[PC (SMB)] ([Public]/[Personal]/[Group]) ([Send])
To display: [Box] - Select a User Box - [Open] - Select the file - [Send] - [Direct Input] - [PC (SMB)]
Enters the destination PC name (host name) or IP address to send files to the shared folder of the network PC.
When specifying multiple destinations, tap [Next Dest.] to add destinations.
Settings Description
[Address] Enter the destination IP address or host name.
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
• Example of host name entry: "host.example.com" (Also enter a domain
name.)
You can also specify a destination by E-mail address. To specify a desti-
nation by E-mail address, enter the destination IP address or host name
following "ipaddrfax@".
To enter an IP address following the @ symbol, put the IP address in brack-
ets "[ ]".
• Example of IP address (IPv4) entry: "ipaddrfax@[192.168.1.1]"
To enter an IP address (IPv6), enter "IPv6:" following left bracket "[ ".
• Example of IP address (IPv6) entry: "ipaddr-
fax@[IPv6:fe80::220:6bff:fe10:2f16]"
To enter a host name following the @ symbol, brackets "[ ]" are unneces-
sary.
• Example of host name entry: "ipaddrfax@host.example.com"
[Port Number] If necessary, change the port number.
Normally, you can use the original port number.
[Machine Type] Select either of [Color] and [Monochrome] according to the recipient ma-
chine.
Settings Description
[Host Name] Enters the destination PC name (host name) or IP address (up to 253 bytes
long).
• Example of PC name (host name) entry: "HOME-PC"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path] Enter the shared folder name of the computer specified in [Host Name] with
up to 255 bytes. The shared folder name is generally referred to as a shared
name.
• Entry example: "scan"
When specifying a folder in the shared folder, insert a "\" symbol between
the folder names.
• Entry example: "share\document"
[User Name] Enter the name of a user who has privileges to access the folder specified
in [File Path], using up to 64 characters.
• Entry example: "public user"
To Next Page
Loading...
Need help?
General
