bizhub C754/C654 15-63
15
[Image Shift] ([Public]/[Personal]/[Group]) ([Combine])
To display: [Box] - Select a User Box - [Open] - Select multiple files - [Other] - [Combine] - [Application] -
[Layout] - [Image Shift]
You can fine tune the print position of the image upward, downward, rightward, and leftward with respect to
the paper. When an image is printed on the back side, you can also fine tune its position.
[Margin Position] Select a margin position on each sheet of paper.
• [Auto]: The binding direction is automatically set. When the long side of
the file is 11-11/16 inches (297 mm) or less, the binding position is set
to the long side of paper. When the long side of the file exceeds 11-
11/16 inches (297 mm), the binding position is set to the short side of
paper.
• [Left Bind]: Select this option when setting the binding position to the
left of paper.
• [Right Bind]: Select this option when setting the binding position to the
right of paper.
• [Top Bind]: Select this option when setting the binding position to the
top of paper.
[Margin Adjustment Value] Adjust page the margin in the range 1/16 inch to 3/4 inch (0.1 mm to 20.0
mm).
Adjust it by tapping [+]/[-] for the inch area, or by tapping [+]/[-] or pressing
the Keypad for the centimeter area.
Settings Description
Settings Description
[ON]/[OFF] Select [ON] to shift an image.
[Front Side]/[Back Side] Adjust the image position on the print paper, by shifting the image in the
horizontal or vertical direction.
• [Shift Left]/[Shift Right]: Shifts the image to the left or right. Adjust shift
distances by tapping [+]/[-] for the inch area, or by tapping [+]/[-] or
pressing the Keypad for the centimeter area.
• [Shift Top]/[Shift Bottom]: Shift the image upward or downward. Adjust
shift distances by tapping [+]/[-] for the inch area, or by tapping [+]/[-]
or pressing the Keypad for the centimeter area.
[Apply on Back] Set this item to use the same settings as used on the front side for the rear
side of the print paper.
To Next Page
Loading...
Need help?
General
