bizhub C754/C654 15-103
15
Tips
- The optional Finisher is required to use the Staple function.
- To use the punch function, install the Punch Kit PK-521 or Z Folding Unit in the optional Finisher
FS-535, or install Punch Kit PK-520 in the Finisher FS-534.
- The optional Finisher and Saddle Stitcher are required to use the Fold/Bind function.
- The optional Finisher and Saddle Stitcher are required to use the Tri-Fold function.
- To use the Z-fold function, the optional Finisher FS-535 and Z Folding Unit are required.
[Application] ([Secure Print]) ([Print])
To display: [Box] - [System] - [Secure Print] - Select the file - [Print] - [Application]
Set the advanced print options.
Settings Description
[Layout] Set a page margin on each print paper and offset the print position.
[Tailoring] Adds front and rear covers, and inserts papers.
[Stamp/Composition] You can add a page number and a stamp during printing.
[Copy Security] Embeds copy protection information on each sheet of print paper.
To Next Page
Loading...
Need help?
General
