COMMON RAIL SYSTEM
07-CR-E5,07-CR-TE5,07-CR-TIE5, DM
1-S121
9Y3200007CRS0157US0
Name Excessive PM3
ISO 14229
P-Code
P3006
J1939-73
SPN 3701
FMI 15
SPN Name
SAE J1939 Table C1
Diesel Particulate Filter Status
DTC Name Excessive PM3
Detection item • PM accumulation level 3
DTC Set
Preconditions
• Battery voltage is normal
DTC set parameter
• PM accumulation more than trigger level
• Regeneration level = 3
Time to action or
number of error
detection
•Transient
Limp Home Action
by engine ECU
(system action)
• Output limitation: Approximately 50 % of normal condition
Behaviour During
Malfunction
• Insufficient output
Engine Warning
Light
•ON
Recovery from
error
• Diagnostic counter = zero or Key switch turn OFF
Delay time for
recovery
• Immediately
Remark • To minimize PM out put
To Next Page
Loading...
