2. Attach new primary element and secondary
element of the air cleaner.
(1) Secondary (safety) element
(2) Primary element
(3) Evacuator valve
(4) Cover
IMPORTANT :
• Be sure to refit the cover with the arrow
(on the rear of cover) upright. If the cover is
improperly fitted, the evacuator valve will
not function and dust will adhere to the
primary element.
2. Checking the exhaust manifold
Be sure to perform once yearly or after every sixth
cleaning, whichever comes first.
• Consult your local KUBOTA Dealer for checking the
exhaust manifold.
SERVICE EVERY 1500 HOURS
1. Cleaning the fuel injector nozzle
tip
• Consult your local KUBOTA Dealer for cleaning the
fuel-injector-nozzle-tip.
2. Replacing the oil separator
element
WARNING
To avoid personal injury or death:
• Be sure to stop the engine before replacing the
oil-separator-element.
1. Remove the cover.
2. Remove the oil-separator-element. Wipe off the oil
and carbon in the case with a clean rag.
3. Fit a new oil-separator-element.
4. Tighten the cover.
[ROPS type]
[CAB type]
(1) Oil separator
(2) Body
(3) Oil separator element
(4) Gasket
(5) Cover
3. Checking the positive crankcase
ventilation (PCV) valve
• Consult your local KUBOTA Dealer for checking the
positive crankcase ventilation (PCV) valve.
4. Checking and cleaning the EGR
cooler
• Consult your local KUBOTA Dealer for checking
and cleaning the EGR cooler.
SERVICE EVERY 1000 HOURS OR 1 YEAR PERIODIC SERVICE
To Next Page
Loading...
