Kubota MX6000 - TECHNIQUES FOR OPERATING THE TRACTOR; Differential Lock and Road Operation Precautions

5. Shift the transmission to neutral.
a. Set the main-gear-shift-lever and the
synchrony-shuttle shift lever to the “NEUTRAL”
position.
(See Main gear shift lever [Manual transmission
type only] on page 45 and Synchro-shuttle shift
lever [Manual transmission type only] on page
46)
(1) Clutch pedal
(2) Brake pedal
(3) PTO clutch control switch
(4) Position control lever
(5) Draft control lever (if equip-
ped)
(6) Main gear shift lever
(7) Range gear shift lever
(8) Synchro-shuttle shift lever
6. Release the clutch pedal.
7. Set the parking brake.
(See To set the parking brake on page 44)
(1) Brake pedal
(2) Parking brake lever
(A) Interlock the brake pedals
(B) Depress
(C) Pull
STOPPING THE TRACTOR [HST
TYPE]
1. Slow down the engine.
2. Depress the clutch pedal and the brake pedal.
3. After the tractor has stopped, disengage the PTO
clutch.
(See PTO clutch control switch on page 83)
4. Lower the implement to the ground.
a. Down the position-control-lever and the draft-
control-lever if equipped.
(See Position control of 3-point hitch mounted
implement on page 91)
5. Shift the transmission to neutral.
a. Set the range-gear-shift-lever to the
“NEUTRAL” position.
(See Range gear shift lever (L-M-H) [HST type]
on page 46)
(1) Brake pedal
(2) PTO clutch control switch
(3) Position control lever
(4) Draft control lever (if equip-
ped)
(5) Range gear shift lever (L-M-
H)
6. Release the clutch pedal.
7. Set the parking brake.
(See To set the parking brake on page 44)
(1) Brake pedal
(2) Parking brake lever
(A) Interlock the brake pedals
(B) Depress
(C) Pull
CHECK DURING DRIVING
1. Cases to stop the engine
immediately
Immediately stop the engine if:
• The engine suddenly slows down or accelerates.
• Unusual noises suddenly are heard.
OPERATING THE TRACTOR STOPPING THE TRACTOR [HST TYPE]
76
MX5400,MX6000