Kubota MX6000 - Page 75

6. Depress the clutch pedal.
(See Clutch pedal [Manual transmission type only]
on page 45)
(1) Clutch pedal
7. Select the travel speed.
(1) Synchro-shuttle shift lever
(2) Main gear shift lever
(3) Range gear shift lever
(4) Front wheel drive lever [4WD
type]
(A) Forward
(B) Neutral position
(C) Reverse
(D) High
(E) Low
• By combination of using the main-gear-shift
lever, the range-gear-shift-lever, and the
synchro-shuttle shift lever, you can obtain
forward speeds and reverse speeds shown in
the following table.
(See Main gear shift lever [Manual transmission
type only] on page 45, Range gear shift lever
[Manual transmission type] on page 46, and
Synchro-shuttle shift lever [Manual transmission
type only] on page 46)
Standard model
8 forward speeds
8 reverse speeds
• Engage the front-wheel-drive [4WD type].
(See Front wheel drive lever on page 44)
(1) Front wheel drive lever [4WD
type]
(A) On
(B) Off
8. Accelerate the engine.
(See Hand throttle lever on page 45 and Foot
throttle [Manual transmission type only] on page 46)
(1) Hand throttle lever
(2) Foot throttle
(A) Increase
(B) Decrease
9. Unlock the parking brake and slowly release the
clutch.
(See To release the parking brake on page 44)
(1) Brake pedals
OPERATING THE TRACTOR
MX5400,MX6000
71