1-6
Introduction
PC2R
PC2R
PC2R Rear Panel
Figure 1-7 PC2R rear panel
Rear Panel Features
Audio Outs—Balanced 1/4” left and right audio output jacks to connect to an amplifier, mixer
or sound system.
Digital Out—RCA jack to connect to digital recorders and mixers.
MIDI Ports—In, Thru/Out, and Out ports to connect the PC2 to other MIDI devices to receive,
pass, and send MIDI data.
MIDI Select Switch—Slide switch to select the operation of the MIDI Thru/Out port.
Power In—Keyed four-pin connector to attach the Kurzweil 9VDC power adapter.
PC2R Front Panel
Figure 1-8 is an illustration of the front panel for the PC2R. Enlargements of sections of this
illustration follow, as well as a brief description of the front panel features.
Figure 1-8 PC2R Front Panel
Digital Out
In Thru Out
Thru / Out
LR
MIDIAudio Outs
Manufacturer: Young Chang Co., Ltd.
Serial No.
Designed in USA Made in R.O.K.
THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
Power In
9.0V 2.0A
14.0V~0.25A
Model: PC2R
PC2R
®
MIDI
Ports
MIDI
Select Switch
Power
In
Digital
Out
Audio
Outs
Demo
Performance
Rotary Fast / Slow Perc On / Off Volume Decay Pitch
Edit Modes
KB3
16'
2 2/3'
5 1/3'
2'
8'
1 3/5'
4'
1 1/3'
Chorus / Vib
On / Off
Pre-AmpDrawbar Toggle 1' Chorus / Vib
Depth
Edit / Store Group / Menu Compare Copy
Cancel Enter FX MIDI Receive Global
YesNo
Internal Voices
Split Split LayerSolo
Shift
Main
Layer
VOL
PWR
PUSH
PC2R
MIDI Setups
Zone 1 Zone 2 Zone 3 Zone 4
Panic
ABCD
LCDHeadphones
Power/
Volume
Edit
Modes
Performance
LCD
Contrast
To Next Page
Loading...
