10-27
Troubleshooting > Troubleshooting
F
H
I
Message Checkpoints Corrective Actions
Reference
Page
Failed to specify Job
Accounting.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time
elapses. For details on Auto Error Clear, refer to the following:
Auto Error Clear
(page 8-50)
— Failed to specify Job Accounting
when processing the job
externally. The job is canceled.
Select [End].
—
Failed to store job
retention data.
— The job is canceled. Select
[End].
—
Finisher tray is full of
paper.
Is the acceptable storage
capacity exceeded?
Remove the paper. Printing then
resumes.
—
Folding tray is full of
paper.
Is the acceptable storage
capacity exceeded?
Remove the paper. Printing then
resumes.
—
Message Checkpoints Corrective Actions
Reference
Page
Hard Disk error. — An error has occurred on the
hard disk. Job is canceled.
Select [End].
The error codes are as follows.
01: The amount of data that can
be saved at once has been
exceeded. Restart the system or
turn the power OFF/ON. If the
error still occurs, divide the file
into smaller files.
If the error occurs after the file is
divided, the hard disk is
damaged. Execute [System
Initialization].
04: Insufficient space on the
hard disk to complete this
operation. Move data or delete
unneeded data.
—
Hard disk failure. Call
service.
— Call service. —
Message Checkpoints Corrective Actions
Reference
Page
Incorrect account
ID.
*1
— The account ID was incorrect
when processing the job
externally. The job is canceled.
Select [End].
—
To Next Page
Loading...
Need help?
General
Weight and Dimensions
