Fax Operation (Advanced) 3-43
2 Press the [Box] key. F-Code Relay Box registration is now possible.
3 Press the [Subaddress relay box] key.
4 Press an unregistered key.
5 Use the numeric keys to enter the subaddress 4-digit that you want
to use for this F-Code Relay Box.
6 Press the [Password] key and enter the 4-digit F-Code password
that you want to use for this F-Code Relay Box.
7 Press the [Next] key.
8 Repeat steps 1 and 2 below until all of the final destination fax
numbers are registered. (Max. 300 destinations)
1 Enter the fax number of a final destination.
2 If you entered the fax number with the numeric keys, press the
[Next destinat.] ([Next dest.]) key.
9 Press the [Finish dest. Set] ([Dest. set]) key.
10Select whether or not you want the received documents to be printed
out at your fax (press the [On] key to have them printed and the [Off]
key to stop print out), and whether or not you want send a
Transmission Report regarding the results of the final transmissions
to the initial transmitting station (press the [On] key to send a report
and the [Off] key to not send a report.).
11Press the [Next] key.
Info.
Location
Dial
Basic Application Register
Box
Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
Box type
Subaddress
conf. box
Register box
Subaddress
relay box
Encryption
box
Subaddress relay box
Register box
8888.
0715.
3333.
Note The subaddress will be displayed for all keys that have
already been registered.
Subaddress/password
Password
Enter using # key.
Ba
Register box
Subaddress
0000.
0000. ( 4 digits)
( 4 digits)
Subaddress relay box02.
Note The password can include any combination of the
numerals 0 - 9 and the symbols * and #.
FREE
Subaddress relay box
Enter Destination.
Register box
book
Address
Abbrev.
Delete
SpacePause
ABC
ABC
02.
Dest .1
destinat.
Next
Note You can use the numeric keys, abbreviated
numbers, one-touch keys and group dial keys to enter the
fax number. Chain dial keys can be used as well.
Local print/return
Off
Print Here
Ba
Register box
On
02.Subaddress relay box
Off
On
Return report