Kyocera KM-2540 - Canceling a Reception

2-12 Fax Operation (Basic)
Canceling a Reception
If you want to cancel a reception, perform the following procedure.
1 Press the [Status] ([Act status]) key in the bottom right of the touch
panel. The status of the communication currently in progress will
appear in the message display.
2 Press the [Stop] key. The touch panel will return to the initial mode
settings.
i
gn destination.
.0%
x
transmission
.
t
ion Register
Re-dial
On-hook
Dest.
check
Memory TX
Auto RX
Print Report
Memory usage:
JUN-06-2007 16:00
TX
setting
Status
Status of Fax
Stop
Check Status of Fax
Port
Receive
03.
Pri
n
No. of pages 001.
Service center
Note If you attempt to cancel a reception that is scheduled
from multiple transmitting faxes (such as a Polling Reception)
and there were fax machines still remaining to be received
from, a message will appear in the message display asking
whether or not you want to continue the receptions from the
remaining faxes. To continue, press the [Yes] key. To stop the
receptions, press the [No] key.