Kyocera KM-2540 - Modifying or Deleting Registered Information

Fax Operation (Advanced) 3-13
4 Press the [Chain] key.
5 Use the numeric keys to enter the desired chain dial number.
(Maximum 32 digits)
6 Press the [Next] key.
7 Enter the desired name for the chain dial key. (Maximum 20
characters)
8 Check the registered information. If you want to change any portion
of it, press the key that corresponds to the desired item and change
the information as desired.
9 To register this chain dial key with the entered information as is,
press the [OK] key.
The message display will return to the same screen as was
displayed in step 3.
If you want to continue registering other one-touch keys, repeat
steps 3 through 9.
10If you are finished making settings, press the Reset key to return to
the initial mode. (C) will be displayed next to the registered speed-
dial key.
Modifying or Deleting Registered Information
1 Press the [Register] key. The Register screen will appear.
Dial type
Group
Register the dial.
33600bpsOne-touch
key
Chain
Program
Ba
Enter using # key.
Fax # Ba
Register the dial.
Chain
(MAX. 32 digits)
0003.
Delete
SpacePause
Note [] and [] cursor keys...Use to move the cursor.
[Delete] key...Press to delete the character that the cursor is
currently under. (When the cursor is at the last space, the
previous character will be deleted.)
[Space] key...Press to enter a space.
[Pause] key...Press to enter a slight pause (indicated by a
hyphen) at that point in dialing.
Note In order to enter characters, refer to Entering Characters
on page 2-13.)
Regist'd contents cnf
800 .
FREE.
Register the dial.
Press confirmation key after checking registered contents.
Name
Chain0003.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report