Kyocera KM-2540 - Program (Program Keys); Registering New Program Keys; Saving Specific Communication Settings as a Single; Saving Specific Communication Settings as a Single Program (Program Keys)

Fax Operation (Advanced) 3-57
Saving Specific Communication Settings as a
Single Program (Program Keys)
The operational procedures for various types of communication, such as
Broadcast Transmission, Polling reception, etc., can be registered under
a speed-dial key that will then function as a program key for one-touch
operation. It is also possible to use the timer function, etc., when
registering a program key.
Registering New Program Keys
1 Press the [Register] key. The Register screen will appear.
2 Press the [Dial] key. The touch panel will switch to dial registration.
3 Press an unregistered speed-dial key on the touch panel.
Note A maximum of 1000 speed-dial keys can be registered as
program keys (minus the number of registered one-touch, chain
dial and group dial keys).
The abbreviated number for the speed-dial key that you press
(0001 - 1000) will automatically become the abbreviated number
for the destination fax numbers registered under that program
key.
If you register a program name for each program key, you will be
able to use the address book to search for the related program.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
Info.
Location
Dial
Basic Application Register
Box
Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
Register dial #
Set dial for registration.
Register the dial.
1/167.
Note If there are no unregistered speed-dial keys displayed,
use the [T] and/or [S] cursor keys to switch to a screen that
displays an unregistered key.