5-2 Managing Information About Your Fax Communications
Checking the Result of Each Communication
(Communication Result Display)
You can use the message display to check certain information regarding
the 50 most recent fax transmissions and/or receptions. The
communication result display lets you check the document number, date
and time, destination name, number of pages, type of communication
and the result of your communication.
Checking the Result of Transmissions
Information for up to 50 of the most recent fax transmissions can be
checked in the message display. Information for Broadcast
Transmissions and F-code Transmissions will also appear in the
Transmission Result Display.
1 Press the [Application] key. The Application screen will appear.
2 Press the [TX result on LCD] ([Tx report on display]) key. The most
recent transmissions will be displayed in a list.
3 If 5 or more transmissions have taken place, press the [S] cursor
key or the [T] cursor key to scroll up and down through those
transmissions.
To verify even more detailed information for a particular
transmission, select the desired transmission and press the [Details]
key.
Note Even when restricted access is turned ON, you can display
the results of the last 50 transmissions and 50 receptions
regardless of whether an access code is entered or not.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
RX Polling
TX Polling
Basic Application Register
box input
Sub.conf.
TX status
Reserved
on LCD
TX result
on LCD
RX result
data box
Print encr
box output
Sub.conf.
Print Report
Option screen
Select item.
024.
Contents confirmation
TX result on LCD.
1/3.
020.
019.
012.
03.
03.
03.
03.
STO
To Next Page
Loading...
