Various Settings and Registration 6-17
Selecting the Automatic Reception Mode
(Receive Mode setting)
This fax has 2 or 3 automatic reception modes (depending upon the
model version). The inch version of this fax offers the Automatic Fax
Reception, Auto FAX/TEL Switching and D.R.D. Reception modes. The
metric version contains the Automatic Fax Reception and Auto FAX/TEL
Switching modes. Select from among the available modes that are
available for your fax machine.
1 Press the System Menu/Counter key. The System Menu / Counter
screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] key until Receive Mode (Reception mode) is
highlighted.
4 Press the [Change #] key.
5 Select the desired reception mode by pressing either the [Fax
Reception] ([Fax Rx]) key, the [Auto Fax/Tel. SW] key or the [D.R.D.]
key, as appropriate.
6 If you selected Fax Reception or Auto Fax/Tel. SW, press the [Close]
key. If you are finished making settings, press the Reset key to
return to the initial mode.
7 Select the desired ring pattern.
• Pattern 1: Normal Ring
• Pattern 2: Double Ring
• Pattern 3: S-S-L (Short-Short-Long)
• Pattern 4: S-L-S (Short-Long-Short)
8 Press the [Close] key. If you are finished making settings, press the
Reset key to return to the initial mode.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
System Menu
Default
Copy
Default
FAX
Language
Setting
MP Tray
Orig. Size
Register
Default
Machine
Accou
To Next Page
Loading...
