Kyocera KM-2540 - Sending the Same Documents to Multiple Destinations (Broadcast Transmission)

Fax Operation (Advanced) 3-7
Sending the Same Documents to Multiple
Destinations (Broadcast Transmission)
Broadcast Transmission allows the same documents to be transmitted to
a number of destinations one after another, in a single operation. If, for
example, you want to transmit the same documents from a central office
to multiple branch offices, this function is quite convenient as it only
requires you to perform the transmission operation one time. The
documents you want to transmit are first entered in memory, and dialing
and transmitting operations are repeated automatically for each
destination.
1 Set the documents you want to transmit in the Document Processor
or on the platen.
2 Enter a destination fax number.
> Entering the fax number with the numeric keys...
If you want to enter more than one destination fax number, press the
[Next des] ([N dest.]) key after you enter the first fax number and you
will be able to enter the next number.
Note If you enter all of the destination numbers using abbreviated
numbers, one-touch keys or group dial keys, this fax can
automatically transmit the same documents to up to 300 different
destinations in a single operation. Program keys cannot be used in
combination with any other dialing method.
You can also perform Broadcast Transmission as F-Code Based
Transmission or in conjunction with the timer.
During a Broadcast Transmission to multiple destinations,
documents will be transmitted using the Memory Transmission
mode even if the fax is currently in the Direct Feed Transmission
mode.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Note When the documents are set on the platen, it is
necessary, after each page is scanned, to select whether or
not you want to transmit more pages and to select the size of
each page. (Refer to page 2-8.)
Note You can enter the fax number(s) using the numeric
keys, abbreviated numbers, one-touch keys, group dial keys
or the address book. Chain dial keys can be used as well.
m
it
.0%
x
transmission.
t
ion
Register
Re-dial
On-hook
Dest.
check
Memory TX
Auto RX
Print Report
Memory usage:
JUN-06-2007 16:00
T
X
Original
Size
Original
Image
Density
Mode
8½×11" Normal Regular
l
ete SpacePause Subadd. Next des
Note If you want to enter the next number with one of the
speed-dial keys, press the [One touch destinat.] key instead.
The speed-dial keys will appear.