Kyocera KM-2540 - Setting the Number of Redial Attempts (Number of Redials Setting)

6-14 Various Settings and Registration
Setting the Number of Redial Attempts
(Number of Redials setting)
Sets the number of times the fax will automatically attempt to redial a
number when the other party's fax line is busy or some other trouble
occurs with the connection.
1 Press the System Menu/Counter key. The System Menu / Counter
screen will appear.
2 Press the [Fax Default] key.
3 Press the [T] cursor key until Retry Times is highlighted.
4 Press the [Change #] key.
5 Use the [+] or [-] key to select the desired number of redial attempts.
6 Press the [Close] key. If you are finished making settings, press the
Reset key to return to the initial mode settings.
Note The number of redial attempts can be set here to any
number between 0 and 14.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
System Menu
Default
Copy
Default
FAX
Language
Setting
MP Tray
Orig. Size
Register
Default
Machine
Accou
n
Job
Repor
t
Print
System Menu / Counter
System Menu / Counter
.03
Retry Times Ba
(00 14).~.