3-24 Fax Operation (Advanced)
Initiating Fax Reception From A Connected
Telephone (Remote Switching)
Remote Switching lets you initiate fax reception from a telephone that is
connected to this fax machine. This function is thus convenient if you
want to be able to initiate fax reception from a location separate from the
fax machine itself.
Changing the Remote Switching Number
The factory default setting for the Remote Switching Number is 55, but
you can change this if you want.
1 Press the [Register] key. The Register screen will appear.
2 Press the [Remote SW dial] key. Remote Switching registration is
now possible.
3 Use the numeric keys to enter the new Remote Switching Number (2
digits).
4 Press the [Confirm] key. Registration of the new Remote Reception
Number is complete.
5 If you are finished making settings, press the Reset key.
Note Remote Switching is only possible if a separately purchased
telephone with tone dialing capabilities is connected to this fax
machine. Even if the phone you use has tone dialing capabilities,
depending upon the model of the phone, this function may not
work as expected. For further information, contact your service
representative, an authorized service center or the place or
purchase.
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
Info.
Location
Dial
Basic Application Register
Box
Forwarding
Fax
dial
Remote SW
Test ID
Remote
Restrict.
TX/RX
Print Report
Registering item option screen.
Select item for register.
& Time
Date
key
Encryption
Enter using # key.
Remote Switch Ba
Register remote switch dial.
( 2 digits)
55.
Note If you want to change the entered number, use the []
and/or [] keys to move the cursor to the desired location.
If you want to reset the displayed number to 00, simply press
the Stop/Clear key.
To Next Page
Loading...
