3-38 Fax Operation (Advanced)
Printing Out an F-Code Confidential Box List
Print out this list in order to check the information in each F-Code
Confidential Box as well as data regarding the existence of documents in
each respective box.
1 Press the [Print Report] key. The Print Report screen will appear.
2 Press the [Subad conf box list] key.
3 To print out an F-Code Confidential Box List, press the [Yes] key. An
F-Code Confidential Box List will be printed out.
Entering Documents into an F-Code Confidential Box
Perform the following procedure when you want to enter documents into
your F-Code Confidential Box for transmission under the F-Code Based
Bulletin Board function. Using this procedure, you can add new
documents to those currently in your F-Code Confidential Box, and you
can also delete all of the documents currently in that box and replace
them with new documents.
1 Set the documents you want to transmit.
Note If there are no F-Code Confidential Boxes registered in this
fax, an F-Code Confidential Box List will not be printed out.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
Select size
report
Confirm.
report
Activity
Basic Application Register
box list
Subad conf
key list
One-touch
List
Group dial
dial list
Program
box list
Encryption
box list
Subad. rel
Print Report
Report printing option screen.
Select item.
list
User set.
direc.list
Telephone
key list
Encryption
Note If you want to delete the data for documents stored in an F-
Code Confidential Box, simply print out those documents. (Refer
to Printing Out Documents from an F-Code Confidential Box on
page 3-37.)
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
To Next Page
Loading...
