Fax Operation (Advanced) 3-53
3 Press an unregistered speed-dial key on the touch panel.
4 Press the [Group] key.
5 Enter the other party's fax numbers.
6 Press the [Finish dest. Set] ([Dest. set]) key.
7 Enter the desired group name and the [Next] key. (Maximum 20
characters)
8 Check the currently registered information and press the key that
corresponds to any item that you want to modify.
9 Press the [OK] key.
The message display will return to the same screen as was
displayed in step 3. If you want to continue registering other group
dial keys, repeat steps 3 through 9. If you are finished registering
group dial keys, press the Reset key. (G) will be displayed next to
the registered speed-dial key.
Modifying or Deleting Registered Information
1 Press the [Register] key. The Register screen will appear.
Register dial #
Set dial for registration.
Register the dial.
1/167.
Note If there are no unregistered speed-dial keys displayed,
use the [T] and/or [S] cursor keys to switch to a screen that
displays an unregistered key.
Dial type
Group
Register the dial.
33600bpsOne-touch
key
Chain
Program
Ba
FREE
Group dial
Enter Destination.
Register the dial.
book
Address
Abbrev.
Delete
SpacePause
ABC
ABC
0004.
Dest .1
destinat.
Next
Note You can enter the fax numbers using the numeric keys,
abbreviated numbers, one-touch keys or the address book.
Chain dial keys can be used as well.
If you want to enter multiple fax numbers with the numeric
keys, press the [Next destinat.] ([Next dest.]) key after each
fax number.
Note In order to enter characters, refer to Entering Characters
on page 2-13.)
Place the original & assign destination.
Dest
Ready for fax transmission.
Basic Application
Abbrev.
TXAddress
Register
settingbook
Print Report
To Next Page
Loading...
