Kyocera KM-2540 - Page 49

Fax Operation (Basic) 2-17
3 Press an unregistered speed-dial key on the touch panel.
4 Press the [One-touch key] key.
5 Use the numeric keys to enter the fax number you want to register
under that one-touch key. (Maximum 32 digits)
6 Press the [Next] key.
7 Enter the name of the other party. (Maximum 20 characters)
8 Check the registered information. If you want to change any portion
of it, press the key that corresponds to the desired item and change
the information as desired.
Making More Detailed Settings
9 If you want to perform more detailed settings like selecting the
transmission speed, or designating this one-touch key for F-Code
Based Communication or Encrypted Transmission, press the
[Setting] key and then go to the next step.
10Select the desired transmission speed from among those available:
33600bps, 14400bps and 9600bps.
11If you want to designate this key for F-Code Based Communication,
press the [Subaddress Tx] key and then go to the next step.
If you want to designate this key for Encrypted Transmission, go
directly to step 15.
If you want to register this one-touch key with the entered
information as is, press the [Close] key and proceed directly to step
20.
Register dial #
Set dial for registration.
Register the dial.
1/167.
Note If there are no unregistered speed-dial keys displayed,
use the [T] and/or [S] cursor keys to switch to a screen that
displays an unregistered key.
Dial type
Group
Register the dial.
33600bpsOne-touch
key
Chain
Program
Ba
Enter using # key.
Fax # Ba
Register the dial.
One-Touch Key
(MAX. 32 digits)
0001.
Delete
SpacePause
Note [] and [] cursor keys...Use to move the cursor.
[Delete] key...Press to delete the character that the cursor is
currently under. (When the cursor is at the last space, the
previous character will be deleted.)
[Space] key...Press to enter a space.
[Pause] key...Press to enter a slight pause (indicated by a
hyphen) at that point in dialing.
Note In order to enter characters, refer to Entering Characters
on page 2-13.)
Note If you want to register this one-touch key with the
entered information as is, go directly to step 20.
Detail setting
14400bps
TX Start Speed
Ba
Register the dial.
33600bps
9600bps
Subaddress
TX
Encryption
TX
0001.One-Touch Key
(Either subadd TX. nor encryption trans. can register)