Labrie automizer Service Manual

190 Multiplexing
Table 1 Warning messages (cont’d)
Warning and Caution Messages Solution
Arm Up:Chute Bad Pos. Place Chute in Correct Position
Arm Up:Crusher Not Raised Raise Crusher Panel
Arm:Auxiliary Deadman ON Release Auxiliary Deadman
Arm:Body Raised Lower Body
Arm:Hopper Door Not Close Close Hopper Door
Arm:Pump Not Started Engage Pump
Arm:Tailgate Unlocked Lock Tailgate
AutoDump:Cab EStop Pull Out Cab EStop Button
AutoDump:Pump Not Started Engage Pump
Body:Pump Not Started Engage Pump
Buzzer:Arm Not Stow Retract Arm to Stowed Position
Buzzer:Body Raised Lower Body
Buzzer:TailGate Unlocked Lock Tailgate
Chute:Arm Too High Lower Arm
Chute:Crusher Not Up Raise Crusher
Chute:Pump Not Started Engage Pump
Crusher:Arm Too High Lower Arm
Crusher:Chute Bad Pos. Move Chute to Correct Position
Crusher:Hopper Door Not Closed Close Hopper Door
Crusher:Packer Not Retracted Retract Packer
Crusher:Pump Not Started Engage Pump
ESTOP:Aux. Cab EStop Pull Out Aux. Cab EStop Button
ESTOP:Cab Emergency Stop Pull Out Cab EStop Button
FullEject:Cab EStop Pull Out Cab EStop Button
FullEject:Packer Not Retracted Retract Packer
FullEject:Pump Not Started Engage Pump

Labrie automizer Specifications

General

Brand	Labrie
Model	automizer
Category	Automobile
Language	English