EN
Preparation
43
1
2
▸ Align the handgrip with the base of the camera
• Make sure not to damage the contacts.
▸ Turn the Handgrip lock to the right and hand tighten
Important
• Make sure to check regularly whether the connection is still tight
when using the camera with the handgrip attached and
re-tighten it as needed.
DETACHING THE HANDGRIP
▸ Turn the handgrip to the left to unlock the connection
• Make sure to hold the camera and the handgrip securely while
doing so.
▸ Replace both cover caps over the connections
Important
Make sure that the contact covers are securely in place on the
camera and on the handgrip whenever the handgrip is not attached
to the camera. The highly sensitive contacts could otherwise easily
be damaged.
To Next Page
Loading...
