4-22 Description and Operation
D-I012.1109EN
innovators in agriculture
4.3.2.3 Blockage Route
The menu 'Blockage route' is used to temporally block one or more
routes. If you do not want the vehicle to drive within a particular
distance from the feed fence, block the routes that have that distance.
Blocked routes will be ignored by the time path.
4.3.2.4 Route Analysis
The menu 'Route analysis' has the following options:
• Fail. problty
• Failure analys.
'Fail. problty' gives a quick overview of the reliability per route. 'Failure
analys' gives detailed information and shows per route the action
numbers have a high risk of failure. It also gives an indication of the
fault.
Failure Probability per Route
The display Fail. problty displays for each route, numbered from 1 - 16,
the probability of a failure on a scale from 0 - 5. In the next figure route
1 has a low risk and route 4 a very high risk.
1-2 Failures/route
5
3
1
1 2 3 4 5 6 7 8
• If a routes has a failure probability of more than 2, the risk of failures
is too high.
Buttons:
• [
] to open the next screen
• [ESC] to go one level up.
Failure Analysis
Note:
The menu Failure analys is used by technicians.
The display 'Failure analysis' has 2 tables:
• The table Failure analysis displays per fault category (A - H) the action
numbers that causes a risk
• The second table displays explanations.
To Next Page
Loading...
